Supermicro SuperWorkstation 5038A-I, Руководство пользователя

Страница: 36 / 84

Chapter 5: Advanced Serverboard Setup
5-23 5-22
S
uper
W
orkstation 5038A-I User's Manual
5-10 Onboard Indicators
LAN Port LEDs
The LAN ports are located on the I/O back-
panel of the motherboard. Each Ethernet
LAN port has two LEDs. The yellow LED
indicates activity, while the Link LED may
be green, amber, or off to indicate the
speed of the connections. See the tables
at right for more information.
LAN Port LEDs
Status
LED Color Deinition
Off No Connection or 10/100
Mbps
Green 1 Gbps
Amber 10 Gbps
Power LED
LE2 is a status LED to indicate that the
motherboard is on and running. See
the table on the right for status display
deinitions.
Power LED
Status
Status Deinition
Off System is Off
On System is On
Audio Enable/Disable
Jumper Settings
Both Jumpers Deinition
Pins 1-2 Enabled
Pins 2-3 Disabled
Audio Enable
JPAC1 allows you to enable or disable
the onboard audio support. The default
position is on pins 1 and 2 to enable
onboard audio connections. See the
table on the right for jumper settings.
Manufacturing Mode
Close pins 2 and 3 of jumper JPME2
to bypass SPI lash security and force
the system to operate in Manufacturing
Mode, allowing the user to lash the
system irmware from a host server for
system setting modiications. See the
table on the right for jumper settings.
Manufacture Mode
Jumper Settings
Pin# Deinition
Pins 1-2 Normal
Pins 2-3 Manufacture Mode
BIOS Recovery Switch
The BIOS Recovery Switch (JBR1) is
used to enable or disable the BIOS
Recovery feature of the motherboard.
Slide the switch from the default posi-
tion to begin the recovery process. See
Appendix D for details.
Power Button (S4)
In addition to the soft power switch
provided in JF1, your motherboard is
equipped with a 'soft' power button on
the motherboard. This switch works
the same way as the soft power switch
on JF1.
BIOS Recovery
Jumper Settings
State Deinition
Open Normal
Closed Recover
Manufacture Mode
Jumper Settings
Pin# Deinition
Pins 1-2 Normal
Pins 2-3 Manufacture Mode
Status Display (LED4)
LED4 is made up of two alpha-numeric displays that will display a status or POST
code when the motherboard is powered on. Please download the following AMI
publication for a complete list of POST codes:
http://www.ami.com/support/doc/ami_aptio_4.x_status_codes_pub.pdf