Supermicro SuperWorkstation 5038A-I, Руководство пользователя

Страница: 37 / 84

Chapter 5: Advanced Serverboard Setup
5-25 5-24
S
uper
W
orkstation 5038A-I User's Manual
5-11 SATA Ports
SATA Ports
Ten Serial ATA (SATA) 3.0 ports (I-SATA0~5, S-SATA0~3) are provided on the
motherboard. All SATA 3.0 ports are supported by the Intel C612 PCH chip. RAID
0,1,5,10 are supported on I-SATA 0~5. These high speed ports support transfer
rates of up to 6Gb/s.
Figure 5-5. Driver/Tool Installation Display Screen
5-12 Installing Software
The Supermicro FTP site contains drivers and utilities for your system at ftp://ftp.
supermicro.com . Some of these must be installed, such as the chipset driver.
After accessing the FTP site, go into the CDR_Images directory and locate the ISO
ile for your serverboard. Download this ile to create a CD/DVD of the drivers and
utilities it contains. (You may also use a utility to extract the ISO ile if preferred.)
Another option is to go to the Supermicro website at http://www.supermicro.com/
products/ . Find the product page for your serverboard here, where you may down-
load individual drivers and utilities.
After creating a CD/DVD with the ISO iles, insert the disk into the CD/DVD drive
on your system and the display shown in Figure 5-5 should appear.