Supermicro SuperWorkstation 5038A-I, Руководство пользователя

Страница: 27 / 84

Chapter 5: Advanced Serverboard Setup
5-5 5-4
S
uper
W
orkstation 5038A-I User's Manual
Installing an LGA 2011 Processor
1. There are two levers on the
LGA2011 socket. First press and
release the load lever labeled
'Open 1st'.
2. Press the second load lever
labeled 'Close 1st' to release the
load plate from its locked position.
OPEN 1st
W
ARNING
!
OPEN 1st
W
ARNING
!
Press down on the lever labeled
'Close 1st'
Pull lever away
from the socket
3. With the lever labeled 'Close 1st'
fully retracted, gently push down
on the 'Open 1st' lever to open the
load plate. Lift the load plate to
open it completely.
4. Using your thumb and the index
inger, remove the 'WARNING'
plastic cap from the socket.
W
ARNING
!
OPEN 1st
W
ARNING
!
Socket Keys
CPU Keys
Gently push
down to pop
the load plate
open.
5.
Use your thumb and index inger
to hold the CPU by its edges. Align
the CPU keys, which are semi-
circle cutouts, against the socket
keys.
6. Once they are aligned,
carefully lower the CPU
straight down into the
socket. (Do not drop
the CPU on the socket.
Do not move the CPU
horizontally or verti-
cally and do not rub the
CPU against any pins of
the socket, which may
damage the CPU or the
socket.)
5-4 Processor and Heatsink Installation
Caution: When handling the processor package, avoid placing direct pressure on
the label area of the fan.
Notes:
•
Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certiied multi-
directional heatsink only.
•
Make sure to install the motherboard into the chassis before you install the
CPU heatsinks.
•
When receiving a motherboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.