48
SuperServer 6019P-WT8 User's Manual
4.3 Ports
Rear I/O Ports
See the figure below for the locations and descriptions of the various I/O ports on the rear
of the motherboard.
Rear I/O Ports
No. Description
No. Description
1.
VGA port
6.
USB3 (3.0)
2.
Dedicated IPMI LAN
7.
LAN2
3.
USB0 (3.0)
8.
LAN1
4.
USB1 (3.0)
9.
Unit Identifier Switch
5.
USB2 (3.0)
9
8
7
6
1
5
4
3
2
VGA Port
The onboard VGA port is located next to IPMI LAN port on the I/O back panel. Use this
connection for VGA display.
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch and indicator (LE1) are located near theg rear I/O ports. When
pressing the UID switch, the UID LED indicator will be turned on. Press the UID switch again
to turn off the LED. The UID Indicator provides easy identification of a system unit that may
be in need of service.
Note:
UID can also be triggered via IPMI on the motherboard. For more information on IPMI,
please refer to the IPMI User's Guide posted on our website at
.
UID Switch
Pin Definitions
Pin#
Definition
1
Ground
2
Ground
3
Button In
4
Button In
UID LED
Pin Definitions
Color
Status
Blue: On
Unit Identified
