SuperServer 6019P-WT8 User's Manual
39
Power Supply
The 6019P-WT8 has a single 600/650W power supply. This power supply module has an
auto-switching capability, which enables it to automatically sense and operate at a 100V -
240V input voltage.
An amber light on the power supply is illuminated when the power is switched off. An green
light indicates that the power supply is operating.
Replacing a Power Supply Module
1. If the system is still on, power down the server as described in Section 3.1.
2. Remove the two screws located at the middle of the power supply, which secure it to the
chassis. You can then lift the module straight out of the chassis.
3. Replace the failed unit with another unit of the same wattage. It is highly recommended
to replace it with the exact same power supply.
4. Carefully insert the new unit into position in the chassis and secure it with the two
screws at the rear of the unit.
5. Before reconnecting the power cord, make sure the power switch on the power supply
is in the off position. Then reconnect the power cord, replace the chassis top cover and
push the unit back into the rack.
6. Finish by depressing the power button on the front of the system.
