Supermicro SUPERSERVER 6018TR-T, Руководство пользователя

Страница: 62 / 144

5-10
SUPERSERVER 6018TR-T/TF User's Manual
5-5 Installing Memory
Caution: Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
Installing Memory
1. Insert the desired number of DIMMs into the memory slots, starting with P1-
DIMMA1. For best performance, please use DIMM modules of the same type
and speed in the same bank.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory
slot.
4. Align the notches on both ends of the module against the receptive points at
each side of the slot.
5. With your thumbs, press the notches on both ends of the module straight
down into the slot until the module snaps into place.
6. Press the release tabs to their locking positions to secure the DIMM into the
slot.
Lock/Release Tabs
Notches
Release
Release
Figure 5-3. Installing DIMMs
Note: 512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB or 64 GB size memory
modules are supported. It is highly recommended that you remove the power cord
from the system before installing or changing memory modules. Please refer to
our web site for memory that has been tested on the X10DRT-L/LIBF serverboard.
Removing Memory Modules
Press both release tabs on the ends of the DIMM to unlock it. Once the DIMM is
loosened, remove it from the memory slot.