Supermicro SUPERSERVER 6015V-M3, Руководство пользователя

Страница: 42 / 122

5-8
S
UPER
S
ERVER 6015V-M3/6015V-MT User's Manual
5-6 Installing Memory
1. Memory support
The X7DVL-3/X7DVL-i supports up to 24 GB of ECC FBD (Fully Buffered DIMM)
DDR2-667 or DDR2-533 SDRAM. The memory scheme is interleaved, so you must
populate two slots at a time, beginning with slot 1A and 2A, then slots 1B and 2B
and fi nally slots 1C and 2C. You may populate any even number (2, 4 or 6) of
DIMMs. See chart below for optimizing your DIMM installation.
2. Installing memory modules
Insert each memory module vertically. Pay attention to the notches along the bottom
of the module to prevent inserting it incorrectly. Gently press down on the DIMM
module until it snaps into place in the slot (see Figure 5-3).
!
CAUTION! Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
To Install: Insert module vertically and press down until it snaps into place. Pay attention to the bottom
notches.
To Remove: Use your thumbs to gently push each release tab outward to free the DIMM from the
slot.
Figure 5-3. DIMM Installation
Note: Notch
should align
with its
receptive point
on the slot
Notch
Notch
Release
Tab
Release
Tab