Supermicro SUPERSERVER 6013L-8, Руководство пользователя

Страница: 18 / 108

2-2
S
UPER
S
ERVER 6013L-8 Manual
Choosing a Setup Location:
- Leave enough clearance in front of the rack to enable you to open the
front door completely (~25 inches).
- Leave approximately 30 inches of clearance in the back of the rack to
allow for sufficient airflow and ease in servicing.
- This product is for installation only in a Restricted Access Location (dedi-
cated equipment rooms, service closets, etc.).
Rack Precautions:
- Ensure that the leveling jacks on the bottom of the rack are fully extended
to the floor with the full weight of the rack resting on them.
- In single rack installation, stabilizers should be attached to the rack.
- In multiple rack installations, the racks should be coupled together.
- Always make sure the rack is stable before extending a component
from the rack.
- You should extend only one component at a time - extending two or
more simultaneously may cause the rack to become unstable.
Server Precautions:
- Review the electrical and general safety precautions in Chapter 4.
- Determine the placement of each component in the rack before you
install the rails.
-
Install the heaviest server components on the bottom of the rack first, and
then work up.
- Use a regulating uninterruptible power supply (UPS) to protect the
server from power surges, voltage spikes and to keep your system operat-
ing in case of a power failure.
-
Allow the hot plug SCSI drives and power supply units to cool before
touching them.
-
Always keep the rack's front door and all panels and components on
the servers closed when not servicing to maintain proper cooling.
! !
Warnings and Precautions!