Supermicro SUPERSERVER 5018A-LTN4, Руководство пользователя

Страница: 88 / 118

7-12
SUPERSERVER 5018A-LTN4 User's Manual
Pass Gate MonteCarlo
Select Enabled to enable a algorithm search to fi nd the maximum value of the
Pass Gate test. The options are Disabled and Enabled.
Pass Gate Maximum Failures
Use this feature to specify the maximum number that Pass Gate failures will
be counted for.
Pass Gate Maximum Repetition
Use this feature to specify the number that the Pass Gate tests will be repeated.
Fast Boot
Select Enabled to skip the routine memory procedure and attempt to boot the
system using the last valid memory confi guration settings at bootup. The options
are Disabled , and Enabled.
Smm Size (MB)
Use the keyboard to enter a value for the size of the SMM/TSEG region where 1
MB is aligned to.
Force Memory Map Ax
Select Enabled to force the BIOS setup utility to specify the total number of Kb (or
an error) of memory errors detected by the BIOS upon OS initialization. The options
are Enabled and Auto.
Memory Frequency
This feature sets the memory frequency limits for the DIMM modules installed on the
the motherboard. The options are Auto, DDR3-1333 (MHz), and DDR3-1600 (MHz).
Memory Channels
Use this feature to confi gure the settings for memory channels. The options are
Auto and Single Channel.
MRC (Maximal Ratio Combining) Debug Messages
Use this feature to set the debug output display in MRC. The options are Disabled,
Minimum, Medium, and Maximum.
DDR Voltage
Use this feature to set the DDR3 voltage setting. The default option is 100 .
Fine DDR Voltage
Use this feature to set the fi ne DDR3 voltage setting. The options are Auto , 1.25V,
1.35V, and 1.50V.