Supermicro SUPERSERVER 5018A-LTN4, Руководство пользователя

Страница: 73 / 118

Chapter 6: Advanced Chassis Setup
6-7
Figure 6-5. Installing the Expansion Card and Riser Card
Figure 6-4. Locating the Expansion Card Clip
Expansion Card Clip
Installing the Expansion Card
1. Power down the server, disconnect the power cord from the power supply
and remove the cover. Locate the expansion card clip on the back of the
chassis
2. Remove the screws holding the expansion card clip and the PCI slot cover
which covers the PCI slot opening in the back of the chassis.
3. Remove the expansion card clip and the PCI slot cover from the chassis.
4. Outside of the chassis, put the expansion card and the riser card together by
inserting the expansion card into the riser card.
Riser Card Slot
Expansion Card Clip
PCI Slot Cover
6-6 Installing an Expansion Card
The SC504 chassis includes a PCI slot for an optional full-height, half-length
expansion card. A riser card is required in order to connect the expansion card to
the motherboard. For further information on expansion on cards and risers cards,
visit the Supermicro website at www.supermicro.com