Supermicro SUPERSERVER 1028UX-TR4, Руководство пользователя

Страница: 86 / 130

7-2
S
UPER
S
ERVER 1028UX-TR4 User's Manual
How To Change the Configuration Data
The configuration data that determines the system parameters may be changed by
entering the AMI BIOS Setup utility. This Setup utility can be accessed by pressing
<F2> at the appropriate time during system boot.
Note : For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recov-
ery User Guide posted @ http://www.supermicro.com/support/manuals/.
Starting the Setup Utility
Normally, the only visible Power-On Self-Test (POST) routine is the memory test.
As the memory is being tested, press the <F2> key to enter the main menu of
the AMI BIOS Setup utility. From the main menu, you can access the other setup
screens. An AMI BIOS identification string is displayed at the left bottom corner of
the screen below the copyright message.
Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue.
In no event shall the manufacturer be liable for direct, indirect, special, incidental, or
consequential damage arising from a BIOS update. If you have to update the BIOS,
do not shut down or reset the system while the BIOS is being updated to avoid pos-
sible boot failure.
7-2 Main Setup
When you first enter the AMI BIOS Setup utility, you will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main
tab on the
top of the screen. The Main BIOS Setup screen is shown below.
The AMI BIOS main menu displays the following information: