Supermicro SUPERSERVER 1018R-WC0R, Руководство пользователя

Страница: 7 / 76

1-2 1-3
Chapter 1: Introduction S
UPER
S
ERVER 1018R-WC0R User's Manual
1-2 Motherboard Features
The SuperServer 1018R-WC0R is built around the X10SRW-F, a single processor
motherboard based on the Intel
®
C612 Express chipset. Below are the main features
of the X10SRW-F. (See Figure 1-1 for a block diagram of the chipset.)
Processors
The X10SRW-F supports a single Intel E5-2600/E5-1600 v3/v4 Series processor
in an LGA2011 socket (Socket R3). Please refer to the motherboard description
pages on our web site for a complete listing of supported processors (www.super-
micro.com).
Memory
The X10SRW-F has eight DIMM slots that can support up to 1 TB of ECC 3DS
LRDIMM (Load-Reduced DIMMs), 512 GB of ECC LRDIMM or up to 256 GB of
ECC RDIMM (Registered DIMM) DDR4-2400/2133/1600/1333 memory. See Chap-
ter 5 for details.
PCIe Expansion Slots
Two riser cards (RSC-R1UW-2E16-O-P and RSC-R1UW-E8R-O-P) located can
support two PCIe x16 cards and one PCIe x8 card, respectively. See Chapter 5
Section 6 for details.
Serial ATA
A SATA controller is integrated into the chipset to provide ten SATA 3.0 (6/Gbps)
ports, which are RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable
units.
Note:
two SATA DOM ports are also included on the motherboard.
Rear I/O Ports
Ports on the I/O backplane include a COM port, a VGA port, two USB 3.0 ports,
two USB 2.0 ports, two gigabit Ethernet ports and one dedicated IPMI port. A UID
(Unit Identifier) button and LED are also included beside the VGA port.
1-3 Server Chassis Features
The SC116AC-R706WB is Supermicro's third-generation 1U chassis. The following
is a general outline of the main features of the SC116AC-R706WB chassis.
System Power
The SC116AC-R706WB features a 750W power supply composed of two separate
power modules to provide power redundancy. This power redundancy feature allows
you to replace a failed power supply module without shutting down the system.
Hard Drive Subsystem
The SC116AC-R706WB chassis was designed to support ten 2.5" SATA hard-
drives.
Note: the 1018R-WC0R may also support up to two additional SATA3 drives. See
Chapter 6 Section 5 for details.
Front Control Panel
The control panel on the SC116AC-R706WB provides important system monitoring
and control information. LEDs indicate power on, network activity, hard disk drive
activity and a Universal Information LED. Also present are a main power button and
a UID (Unit Identifier) button.
Cooling System
The SC116AC-R706WB chassis has an innovative cooling design that features a fan
tray that can hold up to six sets of 4-cm counter-rotating fans located in the middle
section of the chassis (five fans installed, the sixth is optional). These fans are 1U
high and are powered by 4-pin connectors, with chassis fan speed controlled by
IPMI software. The power supply module also includes a cooling fan.