Supermicro SuperBlade SBM-GEM-X2C, Руководство пользователя

Страница: 85 / 334

31
Chapter 6: 1-Gb Ethernet Switch Firmware
Note that ULTF will only drop an internal link from the blade to the switch if all of the
(external) uplinks defined for that blade have failed (or been disabled) on that switch. As
long as one or more of uplinks on a particular switch (that have been defined for a
particular downlink) is active, the blade and switch will keep the internal link active.
Figure 6-22. Uplink Failure Tracking Configuration Screen
Table 6-9. Uplink Failure Tracking Configuration Screen Controls
Control Description
Enable UpLink Failure
Tracking
Enables/Disables the UPLINK FAILURE TRACKING feature.
Modify Uplink Member
Select the pair ID and uplink port number to add/delete to/from uplink
member of a pair.
Modify Downlink Member
Select the pair ID and downlink port number to add/delete to/from downlink
member of a pair.
Uplink Track Member This column defines member ports of an uplink in a ULFT pair.
Downlink Track Member This column defines member ports of a downlink in a ULFT pair.