Supermicro SuperBlade SBM-GEM-X2C, Руководство пользователя

Страница: 253 / 334

167
Chapter 7: 10-Gb Ethernet Switch Firmware
Timer
Clicking on the T
IMER
tab opens the IGMP S
NOOPING
T
IMER
C
ONFIGURATION
page
( Figure 7-131 ). Table 7-106 lists the parameters found on this page.
Snooping Mode
Specifies the IGMP snooping multicast forwarding mode, which can be
configured using destination IP address or destination MAC address.
Report Forwarding
Specifies whether the IGMP reports are forwarded on All Ports or only on
Router Ports .
Retry Count
Specifies the maximum number of group specific queries sent on a port on
reception of an IGMPv2 leave message.
Query Transmit on TC
Specifies whether IGMP Snooping queries are transmitted whenever
topology changes.
Figure 7-131. IGMP Snooping Timer Configuration Page
Table 7-105. IGMP Snooping Configuration Page Parameters (Continued)
Parameter Description