Supermicro SuperBlade SBM-GEM-X2C, Руководство пользователя

Страница: 47 / 334

1
Chapter 5
Ethernet Switches Modules
Your SuperBlade enclosure can include either of two models of Ethernet switch modules
or two models of Ethernet pass-through modules installed in it.
The Ethernet switch modules and SBM-GEM-002 Gigabit pass-through module can
only be installed in the upper and/or lower left module bays, whereas the SBM-XEM-002
10-Gigabit pass-through module must be installed in a double-wide slot in the enclosure
instead of an InfiniBand Module. The InfiniBand module is discussed in
Chapter 4 .
5-1 SBM-GEM-001 Gigabit Ethernet Switch Module
The SBM-GEM-001 Gigabit Ethernet switch module is a layer 2 Ethernet switch. It
includes ten 1-Gb/s uplink (RJ45) ports and fourteen 1-Gb/s downlink ports for the
SuperBlade's LAN interfaces. The Gigabit Ethernet switch module has two internal
Ethernet paths to the CMM(s). The switch is used to provide a connection between the
Ethernet controller integrated on the mainboard and an external Ethernet device. This is
a hot-pluggable module.
Figure 5-1. SBM-GEM-001 Gigabit Ethernet Switch Module
Table 5-1. SBM-GEM-001 Gigabit Ethernet Switch Module Interface
Item Description
1 RS232 (COM) Serial Port
2 “Initiation OK” LED
3 Module Fault LED
4 RJ-45 Ethernet Ports
5 Ethernet Port Status LEDs
6 Module Release Handle
4
5
1
6
3
2