Supermicro SuperBlade SBM-GEM-X2C, Руководство пользователя

Страница: 228 / 334

Superblade Network Modules User’s Manual
142
Table 7-88. Interface Settings
Parameter Description
VLAN/Tunnel Identifier Specifies the IPv6 interface over which OSPFv3 is enabled.
Area ID Specifies the area ID associated with the IPv6 interface.
Interface Type
Specifies the type of OSPFv3 interface (broadcast, nbma, pointToPoint,
pointToMultipoint).
Priority Specifies the priority of the interface.
Transit Delay
Indicates the estimated number of seconds to transmit a link state update
packet over the interface.
Retransmission Interval
Indicates the number of seconds between the link-state advertisement
retransmissions, for adjacencies belonging to the interface.
Hello Interval
Indicates the length of time, in seconds, between the Hello packets that the
router sends on the interface.
Dead Interval
Specifies the number of seconds for which the router waits for hello packet
from the neighbor before declaring this neighbor down.
Poll Interval
Denotes the larger time interval, in seconds, between the Hello packets
sent to an inactive non-broadcast multi- access neighbor.
Demand Procedures
Indicates whether Demand OSPFv3 procedures must be performed on this
interface.
Metric Value Specifies the metric assigned to this interface.
Neighbor Probing
Enables/disables neighbor probing to determine whether the neighbor is
active/inactive.
Neighbor Probe Retransmit
Limit Indicates the number of consecutive LSA retransmissions before the
neighbor is deemed inactive and the neighbor adjacency is brought down.
Demand Probe Interval Defines how often the neighbor is probed.