Supermicro SuperBlade SBM-GEM-X2C, Руководство пользователя

Страница: 233 / 334

147
Chapter 7: 10-Gb Ethernet Switch Firmware
Table 7-91. BGP Peer Configuration
Parameter Description
IP address Specifies the IP address of the BGP neighbor.
EBGP MultiHop
Enables BGP connections tobe established between peers, which are not
directly connected.
Next Hop
Permits to set the Next Hop as Self or Automatic . By setting this field to
Self , you can make the switch the next hop for all the routes that it
distributes to its peers.
Keep Alive Time (Seconds)
Specifies the maximum time interval between successive updates between
any two BGP peers.
Hold Time (Seconds)
Specifies the Hold time. This is the timer interval that a BGP will wait,
before it decides that a connection to the peer is torn down.
Remote AS Represents the remote autonomous system number.
Advertisement Interval
(seconds) Specifies the interval in seconds for the Minimum Route advertisement
interval timer.
Status Specifies the status of the entry.