Supermicro SUPER X6DHR-C8 Скачать руководство пользователя страница 54

Страница: 54 / 96

4-4

X6DHR-C8 User's Manual

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and

Enabled.

Serial ATA RAID Enable

Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS

environment, use the RAID driver if this feature is set to Enabled. If set to

Disabled

use the Non-RAID driver.)

Native Mode Operation

Select the native mode for ATA. The options are: Parallel ATA, Serial ATA,
Both, and

Auto

IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE

Channel 2 Master, IDE Channel 3 Master

These settings allow the user to set the parameters of IDE Channel 0 Master/Slave,

IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master slots.

The items included in the sub-menu are:

Type

Selects the type of IDE hard drive. The options are

Auto

, (which allows BIOS

to automatically determine the hard drive's capacity, number of heads, etc.),

a number from 1-39 to select a predetermined type of hard drive, CDROM and

ATAPI Removable. The option- "User" will allow the user to enter the parameters

of the HDD installed at this connection. The option-"Auto" will allow BIOS to

automatically conﬁ gure the parameters of the HDD installed at the connection.

Choose the option 1-39 to select a predetermined HDD type. Select CDROM if a

CDROM drive is installed. Select ATAPI if a removable disk drive is installed.

CHS Format

The following items will be displayed by the BIOS:

TYPE:

This item displays the type of CPU.

Cylinders:

This item indicates the status of Cylinders.

Headers:

This item indicates the number of headers.

Sectors:

This item displays the number of sectors.

Maximum Capacity:

This item displays the maximum storage capacity of the

system.

Содержание SUPER X6DHR-C8

































































































Результаты поиска

Содержание SUPER X6DHR-C8

Отзывы:

Похожие инструкции для SUPER X6DHR-C8

Бренды по названию

Популярные бренды

Supermicro SUPER X6DHR-C8, Руководство пользователя

Результаты поиска

Содержание SUPER X6DHR-C8

Отзывы:

Похожие инструкции для SUPER X6DHR-C8

Бренды по названию

Популярные бренды