Supermicro SUPER X6DHR-C8, Руководство пользователя

Страница: 3 / 96

iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X6DHR-C8 motherboard. The X6DHR-C8 supports single or dual
Intel
®
Xeon 64-bit 604-pin EM64T (Nocona) processors at a 800 MHz front side
bus. Packaged in a 604-pin Flip Chip Micro Pin Grid Array(FC-mPGA4) platform in
a Zero Insertion Force(ZIF) socket (mPGA 604), the Xeon EM64T processor, which
supports Hyper-Threading Technology and the EM64T Technology, is ideal for high-
end security server environments with up to two processors on one system bus.
Please refer to the motherboard specifi cations pages on our web site (http://www.
supermicro.com/Product_page/product-m.htm) for updates on supported proces-
sors. This product is intended to be professionally installed.
Manual Organization
Chapter 1 describes the features, specifi cations and performance of the X6DHR-C8
mainboard and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into
the system. If you encounter any problems, see Chapter 3 , which describes
troubleshooting procedures for the video, the memory and the system setup stored
in CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS POST Messages.
Appendix B lists BIOS POST Codes.
Appendix C lists Software Installation Instructions.
Conventions Used In The Manual
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent
catastrophic system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installa
tion or to prevent damage to the components.
(*Note): Note: Additional Information given to differentiate various models
or to ensure correct system setup.