Supermicro SUPER X6DHR-C8, Руководство пользователя

Страница: 20 / 96

2-2
X6DHR-C8 User's Manual
IMPORTANT: Always connect the power cord last and always remove it before add-
ing, removing or changing any hardware components. Make sure that you install
the processor into the CPU socket before you install the CPU (CEK) heat sink.
2-2 Processor and Heatsink Installation
When handling the processor package, avoid placing direct pressure
on the label area of the fan. Also, do not place the motherboard on a
conductive surface, which can damage the BIOS battery and prevent
the system from booting up.
!
CPU Installation
1. Lift the lever on the CPU socket: lift
the lever completely as shown on the
picture on the right; otherwise, you
will damage the CPU socket when
power is applied . (Install CPU1 fi rst.)
Socket lever
Pin1
2. Insert the CPU in the socket, mak-
ing sure that pin 1 of the CPU aligns
with pin 1 of the socket (both corners
are marked with a triangle). When
using only one CPU, install it into CPU
socket #1 (socket #2 is automatically
disabled if only one CPU is used).
3. Press the lever down until you
hear the *click* so you can be
sure that the CPU is securely
installed in the CPU socket.
Pin 1
Socket lever in the
locking Position