Supermicro SUPER X6DHR-C8, Руководство пользователя

Страница: 21 / 96

Chapter 2: Installation
2-3
Screw#3
Heatsink Installation
1. Do not apply any thermal compound to
the heatsink or the CPU die-the required
amount has already been applied.
2. Place the heatsink on top of the CPU so
that the four mounting holes are aligned
with those on the retention mechanism.
3. Screw in two diagonal screws (ie the #1
and the #2 screws) until just snug (-do not
fully tighten the screws to avoid possible
damage to the CPU.)
4. Finish the installation by fully tightening all
four screws.
Screw#1
Screw#2
Screw#1
Intel CEK Heatsink
Screw#4
Screw#2
(Caution! We do not recommend that the CPU or
the heatsink be removed. However, if you do need
to un-install the heatsink, please follow the instruc-
tions below to remove the heatsink to prevent dam-
age done to the CPU or the CPU socket. )
1. Unscrew and remove the heatsink screws
from the motherboard in the sequence as show
in the picture on the right.
2. Hold the heatsink as show in the picture on the
right and gently wriggle the heatsink to loosen it
from the CPU. (Do not use excessive force when
wriggling the heatsink!!)
3. Once the CPU is loosened from the heatsink,
remove the heatsink from the CPU socket.
4. Clean the surface of the CPU and the heatsink
to get rid of the old thermal grease. Reapply the
proper amount of thermal grease on the surface
before you reinstall the CPU and the heatsink.
Heatsink Removal