Supermicro SBA-7141A-T, Руководство пользователя

Страница: 44 / 72

SBA-7141A-T Blade Module User’s Manual
5-6
IDE Configuration
The menu options in the IDE Configura
TION
submenu and their descriptions are shown
in Table 5-2
Probe Filter
This setting sets the Initialization mode for the Probe Filter. Options include
Auto , Disabled or MP Mode.
Clock Spread
Spectrum
This setting Enables or Disables the Internal SB spread. Do NOT change this
option if you are not sure about it.
NOTE: You also shouldn’t enable the external clock spread and internal SB
spread at the same time or the system will be come unstable.
Table 5-2. IDE Configuration Submenu
Menu Option Description
Onboard PCI IDE
Controller
Use this option to set the Onboard PCI IDE controller settigns for your system.
Options include the following:
Disabled – This disables the integrated IDE controller.
Primary – This enables only the Primary IDE controller.
Secondary – This enables only the secondary IDE controller.
Both – This enables both IDE controllers.
X
Primary IDE Master
While entering setup the BIOS auto detects the presence of IDE devices. This
sub-menu displays the status of Auto detection of the IDE devices.
Device
Information
(Static)
This static display shows device information for the primary IDE master device.
LBA/Large Mode
This option sets LBA Mode. Disabled allows you to disable LBA Mode. Auto
enables LBA Mode if the device supports it and it is not already formatted with
LBA Mode disabled.
Block
(Multi-Sector
Transfer)
Use this option to set mult-sector transfer. When Disabled, the data transfer from
and to the device occurs one sector at a time. When set to
Auto , the data
transfer from and to the device occurs multiple sectors at a time if the device
supports it.
PIO Mode
This option allows you to select the PIO mode. Options include Auto , 0, 1, 2, 3,
or 4.
DMA Mode
Use this option to select the DMA mode. Auto allows you to auto detect the
mode to use. The term
SWDMAn meansr SingleWord DMAn, MWDMAn means
MultiWordDMAn and UDMAn means Ultra DMAn. Options include Auto ,
SWDMA0, SWDMA1, SWDMA2, MWDMA0, MWDMA1, MWDMA2, UDMA0,
UDMA1, UDMA2, UDMA3, UDMA4, UDMA5 and UDMA6.
S.M.A.R.T
S.M.A.R.T stands for Self-Monitoring Analysis and Reporting Technology. This
option allows you to enable or disable S.M.A.R.T. on your system. Options
include
Auto , Disabled or Enabled.
32Bit Data
Transfer
This option Enables or Disables 32-bit data transfer on your system.
Table 5-1. CPU Configuration Submenu (Continued)
Menu Option Description