Supermicro MicroBlade MBI-6119G-C4, Руководство пользователя

Страница: 61 / 84

5-11
Chapter 5: BIOS
Maximum Memory
Frequency
Use this setting to restrict the maximum memory frequency below the
enforced POR. Frequencies you can select range from 1333 ~ 3200 and
Auto . DO NOT select Reserved from the list.
Max TOLUD
This feature allows you to specify the maximum value of TOLUD. Selecting
the
Dynamic assignment would adjust TOLUD automatically based upon
the largest MMIO length of the installed graphic controller. Options include
Dynamic and values from 1 GB ~ 3.5 GB.
Energy Performance
Gain
This feature Enables or Disables the Energy Performance Gain.
Memory Scrambler This feature Enables or Disables Memory Scrambler support.
Fast Boot This feature Enables or Disables fast path through the MRC.
REFRESH_2X_
MODE
Use this feature to select options for enabling or disabling refreshing 2X
mode. Options include
Disabled , 1-Enabled for WARM or HOT and
2-Enabled for HOT only.
Closed Loop
Thermal
Management Use this feature to Enable or Disable Closed Loop Thermal Management
for the system. When
Enabled , the CLTM pcode algorithm will be used.
Note: CLTM will precede OLTM.
 PCH-IO Configuration Use this sub-menu for configuring PCH-IO options.
Intel PCH Information
Static information concerning Intel PCH is displayed at the top of this
screen.
Port 61h Bit-4 Emulation
Emulation of Port 61h bit-4 toggling in SMM is Enabled or Disabled using
this setting.
PCIe PLL SSC Use this setting to Enable or Disable PCIe PLL SSC.
Table 5-6. SATA Configuration Sub-menu
Menu Option Description
SATA Controller
This feature allows you to enable or disable the SATA controller. The
options are
Enabled and Disabled.
SATA Mode Selection Use this setting to configure the SATA for either the RAID or AHCI options.
SATA Frozen
This setting enables/disables the Freeze Lock Security feature. The
options are Enabled
and Disabled .
SATA0 ~ SATA5 Hot Plug
This feature designates this port for hot plugging. Set this item to Enabled
for hot-plugging support, which will allow the user to replace a SATA drive
without shutting down the system. The options are
Enabled and Disabled.
SATA0 ~ SATA5 Spin Up
Device
If enabled for any of the ports Staggered Spin Up will be performed and
only the drives which have this option enabled will spin up at boot.
Otherwise (if disabled) all drives will spin up at boot. The options for this
setting are Enabled and
Disabled .
SATA0 ~ SATA5 SATA
Device Type This setting allows you to specify the selected port SATA device as being
either a
Hard Disk Drive or Solid State Drive.
Table 5-5. Chipset Configuration Sub-menu (Continued)
Menu Option Description