manualshive.com logo in svg

Supermicro MicroBlade MBI-6119G-C4, Руководство пользователя

Поделиться
Скачать
Supermicro MicroBlade MBI-6119G-C4 Скачать руководство пользователя страница 71

5-21

Chapter 5: BIOS

Table 5-16. Security Menu Options 

Menu Option

Description

Password Check

This setting allows you to specify when the password is checked. Options 
specify when the setup should be done with 

Setup

 having the password 

checked when invoking setup, while Always checks the password while 
invoking setup as well as on each boot.

Administrator Password

This allows you to create an administrator password for the system. 

CSM Support

This setting allows you to enable or disable CSM support. The options are 
Disabled

 

and 

Enabled

.

HDD Security Configuration

These options allow you to setup the HDD Security Configuration for each 
of the selected drives.

Secure Boot Sub-menu

This sub-menu allows you to customize Secure Boot settings.

Secure Boot Information

Static information for the System Mode, Secure Boot and Vendor Keys is 
provided at the top of this screen.

Secure Boot 

This setting can be enabled if the system is running in a User Mode with an 
enrolled Platform Key (PK) and the CSM function is disabled. The options 
include 

Disabled 

and Enabled.

CSM Support

Use this setting to 

Enable

/Disable CSM Support.

Key Management

This sub-menu allows the user to configure the following Key Management 
settings.

Platform Key 

(PK)

This allows you to configure the settings of the Platform Keys.

Key Exhange 

Key

This allows you to configure the Key Exchange key. Options include Set 
New Key or Append Key.

Authorized 

Signatures

This allows you to configure the Authorized Signatures key. Options 
include Set New Key or Append Key. 

Forbidden 

Signatures

This allows you to configure the Forbidden Signatures key. Options include 
Set New Key or Append Key. 

Authorized 

TimeStamps

This allows you to configure the Authorized TimeStamps key. Options 
include Set New Key or Append Key. 

OsRecover 

Signatures

This allows you to configure the OsRecover Signatures key. Options 
include Set New Key or Append Key. 

Содержание MicroBlade MBI-6119G-C4





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды