Supermicro 8052-6, Руководство пользователя

Страница: 92 / 110

7-22
S
UPER
S
ERVER 8052-8/8052-6 Manual
7-9 Security Setup
Choose Security from the AMIBIOS Setup main menu. All Security Setup op-
tions are described in this section. The Security Setup screen is shown below.
Supervisor Password
User Password
AMIBIOS provides both Supervisor and User password functions. If you
use both passwords, the Supervisor password must be set first. The sys-
tem can be configured so that all users must enter a password every time
the system boots or when AMIBIOS Setup is executed, using either or both
the Supervisor password or User password. The Supervisor and User
passwords activate two different levels of password security. If you select
password support, you are prompted for a 1 – 6 character password. Type
the password on the keyboard. The password does not appear on the
screen when typed. Make sure you write it down. If you forget it, you must
clear CMOS and reconfigure. Remember your Password! Keep a record
of the new password when the password is changed. If you forget the
password, you must erase the system configuration information in CMOS.
BIOS SETUP UTILITY
Main Advanced Chipset PCIPnP Power Boot Security
Supervisor Password :
Not Installed
User Password : Not Installed
> Change Supervisor Password
> Change User Password
> Clear User Password
Boot Sector Virus Protection
[Disabled]
Install or Ch
password.
↔
Select
↑↓
Select
Enter Go to
F1
Genera
F10 Save a
ESC Exit
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.