Supermicro 8042-6, Руководство пользователя

Страница: 52 / 114

5-18
S
UPER
S
ERVER 8042-8/8042-6 Manual
SMB
A n S M B ( S y s t e m M a n a g e m e n t
Bus) connection is located at J63.
C o n n e c t t h e a p p r o p r i a t e c a b l e
here to utilize SMB on your sys-
tem.
Power Supply Fail Header
Connect a cable from your power
supply to the header labelled JP46
to provide warning of power sup-
ply failure. This warning signal is
passed through the PWR_LED pin
on JF1 to provide indication of a
p o w e r f a i l u r e o n t h e c h a s s i s .
This feature is only available when
using triple-redundant Supermicro
power supplies. See the table on
the right for pin definitions.
P ower S upply Fail Header
P in Definitions
(JP 46)
P in
Nu m ber
1
2
3
4
Definition
P /S 1 Fail S ignal
P /S 2 Fail S ignal
P /S 3 Fail S ignal
Reset (from M B )
Pin
Number
1
2
3
Definition
+5V Standby
Ground
W ake-up
W ake-On-LAN Pin
Definitions (W OL)
Wake-On-LAN
The Wake-On-LAN header is des-
ignated as WOL. You must enable
the LAN Wake-Up setting in BIOS
to use this feature and have a
LAN card with a Wake-on-LAN
connector and cable. See table on
the right for pin definitions.
Pin
Num ber
1
2
3
Definition
+5V Standby
Ground
W ake-up
Wake-On-LAN Pin
Definitions (JP52)
Wake-On-Ring
The Wake-On-Ring header is des-
ignated as JP52. This function al-
lows your system to receive and
be "woken up" by an incoming call
to the LAN port when in suspend
state. See the table on the right
for pin definitions. You must have
a Wake-on-Ring card and cable to
use this feature.