Supermicro 8042-6, Руководство пользователя

Страница: 20 / 114

2-4
S
UPER
S
ERVER 8042-8/8042-6 Manual
Installing the Chassis Rails:
Position the fixed chassis rail sections you just removed along the side of
the 8042-8/8042-6 chassis making sure the five screw holes line up. Be
aware that these two rails are left/right specific. Screw the rail securely
to the side of the chassis (see Figure 2-2). Repeat this procedure for
the other rail on the other side of the chassis.
Locking Tabs: As you have seen, both chassis rails have a locking tab,
which serves two functions. The first is to lock the server into place
when installed and pushed fully into the rack, which is its normal position.
These tabs also lock the server in place when fully extended from the
rack. This prevents the server from coming completely out of the rack
when you pull it out for servicing.
Figure 2-2. Installing the Chassis Rails
Installing the Rack Rails:
Determine where you want to place the 8042-8/8042-6 in the rack.
(See Rack and Server Precautions in Section 2-3.) Position the fixed rack
rail/sliding rail guide assemblies at the desired location in the rack,
keeping the sliding rail guide facing the inside of the rack. Screw the
assembly securely to the rack using the brackets provided. Attach the
other assembly to the other side of the rack, making both are at the exact
same height and with the rail guides facing inward (see Figure 2-3).
Locking Tab