Supermicro 8042-6, Руководство пользователя

Страница: 3 / 114

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 8042-8/8042-6. Installation and maintainance should be performed
by experienced technicians only.
T h e S u p e r S e r v e r 8 0 4 2 - 8 / 8 0 4 2 - 6 i s a h i g h - e n d , q u a d p r o c e s s o r 4 U
rackmount server based on the SC862 4U rackmount server chassis and
the P4QH8/P4QH6, a quad processor serverboard that supports Intel Xeon
®
processors MP of up to 2.8 GHz at a Front Side (system) Bus speed of 400
MHz and up to 32 GB of DDR200 (PC1600) SDRAM main memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER P4QH8/
P4QH6 serverboard and the SC862 chassis, which make up the Super-
Server 8042-8/8042-6.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
8042-8/8042-6 into a rack and check out the server configuration prior to
powering up the system. If your server was ordered without processor
and memory components, this chapter will refer you to the appropriate sec-
tions of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.