31
Chapter 3: Component Installation and Maintenance
Removing the Processor Heatsink Module from the Motherboard
Before removing the processor heatsink module (PHM), power down the server as described
in Section 3.1 and remove the top cover as described in Section 3.2.
1. Using a T30 Torx-bit screwdriver, turn the screws on the PHM counterclockwise to
loosen them from the socket. Loosen the screws in reverse order (#4 first and #1 last).
2. After all four screws are removed, wiggle the PHM gently and pull it up to remove it from
the socket.
Printed Triangle on Motherboard
Removing the screws in
the sequence of 4, 3, 2, 1
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.
CPU Socket
#1
#2
#3
#4
