www.SuperiorFireplaces.US.com
126842-01A
2
SAFETY
WARNING: Improp-
er installation, adjust-
ment, alteration, service
or maintenance can cause
injury or property dam-
age. Refer to this manual
for correct installation and
operational procedures.
For assistance or addi-
tional information consult
a qualified installer, ser
-
vice agency or the gas
supplier.
WARNING: This ap-
pliance is for installation
only in a solid-fuel burning
masonry or UL127 factory-
built fireplace or in a listed
ventless firebox enclosure.
It is design-certified for
these installations in accor-
dance with ANSI Z21.11.2.
Exception: DO NOT install
this appliance in a factory-
built fireplace that includes
instructions stating it has
not been tested or should
not be used with unvented
gas logs.
WARNING: This is an
unvented gas-fired heat
-
er. It uses air (oxygen)
from the room in which
it is installed. Provisions
for adequate combustion
and ventilation air must
be provided. Refer to
Air
for Combustion and Ven-
tilation
section on page 5
of this manual.
This appliance may be in-
stalled in an aftermarket,*
permanently located,
manufactured (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer
TABLE OF CONTENTS
Safety .................................................................. 2
Product Identification
........................................... 4
Local Codes......................................................... 5
Unpacking............................................................ 5
Product Features ................................................. 5
Air For Combustion and Ventilation ..................... 5
Installation ........................................................... 8
Operation .......................................................... 18
Inspecting Burners............................................. 20
Cleaning and Maintenance ................................ 20
Troubleshooting ................................................. 22
Parts .................................................................. 26
Specifications
.................................................... 30
Technical Service............................................... 30
Service Hints ..................................................... 30
Replacement Parts ............................................ 30
Accessories ....................................................... 30
Warranty ............................................................ 32
