Premier VS Infrared Heating System
Page 30
June 04, 2014
hanger after every burner
Install J-bolt on first
[ Max. 8" (20 cm) away ]
Before installing Reflector:
Max. 8"
Burner to Hanger
Combustion Tube
Reflector Hanger
CR003
Figure 17: J-Bolt Installation Detail
INSTALLATION –
Part 1
1.
Use the J-bolt (included with the Burner packaging) to clamp the Tube snugly at the first Reflector Hanger
after a Burner mounting hole location. This prevents the Tube from twisting / rotating once the Burner is
installed. (Refer to Figure 9 and Figure 17)
2.
J-bolts must be installed before the Reflectors are inserted
3.
Install each Burner. Ensure the gasket is properly in place, a small amount of contact cement will hold the
gasket.
Position the Burner
completely to the back of the installation slot
as shown in Figure 18. Ensure
that little or no Tube is in view thru the Viewing Glass/ Window.
4.
Fasten the U-bolts but do
NOT
over tighten as it will damage the Combustion Tube.
