26
SAFETY / LISTING
LABEL
Model: WXS2016
Report Number 14-186
Serial No.
Serial No./Numéro de sérle:
WXS2016-
CHIMNEY & CONNECTOR: Minimum 6" diameter, minimum 24 MSG black steel connector pipe with listed factory-built
chimney suitable for use with solid fuels or masonry chimney. Horizontal connection not tested, refer to local building
codes for installation. Restrictions apply! Read instructions before installing.
Minimum alcove width between combustibles: 44” with double wall pipe and 48” all other installations.
MOBILE HOME approved Class A - UL 103HT chimneys and double wall connectors:
• Security
• Projet
• Jakes Evans
• Dura-Vent
• Metal Fab
• Ameri-Tec
• Metalbestos
• Industrial Chimney
RESIDENTIAL chimney systems must be from the same brands as listed for mobile homes but connector pipe may
be double wall, single wall or single wall with shield as listed above.
Connector pipe and chimney must be of the same brand.
COMPONENTS REQUIRED FOR INSTALLATIONS: : Pedestal Base must be attached as shown in the installation
instructions. If optional blower is NOT used, Rear Heat Shield Block Off Plate shall be installed.
† USA=8" (200mm) from door opening, Canada=8" (200mm) from sides and back of unit
Dimensions to Stove Body
* Mobile Home - USA only
ALCOVE DIMENSIONS (single wall pipe): Minimum 48"(1219mm) width, maximum 48" (1219mm) depth.
ALCOVE DIMENSIONS (double wall pipe): Minimum 44"(1117mm) width, maximum 48" (1219mm) depth.
FLOOR PROTECTOR: The hearth and/or floor protection must be a non-combustible hearth/floor pro-
tector with a minimum thickness of 3/8" (9.5mm), extending beneath the heater and to the front, sides,
and rear as indicated.
NOTICE: A header constructed of COMBUSTIBLE material must meet both N & P clearances. All mobile home instal-
lations require outside air kits (OAK).
Clearance dimensions are to 6” (152mm) flue collar. If a single wall connector pipe with shield is used, a 1 inch air
space is needed between pipe and shield. Shield attaches to rear of stove pipe and must run from stove top to ceiling.
Pipe shield shall be UL listed.
Model / Modèle: WXS2016
Tested to/Testé selon: UL 1482, ULC S627
Type Of Fuel: Solid Wood Only
Optional Blower, Part No. H8873
Blower Electrical Rating: 120V, 60 Hz, 1 Amp
Do not route power cord under or in front of
appliance.
Burning improper fuel (i.e. Charcoal) can result
in carbon monoxide poisoning, which may lead
to death!
WARNING: Do Not obstruct the space beneath
the heater.
OPERATE ONLY WITH DOOR CLOSED
Manufactured By:
INNOVATIVE HEARTH PRODUCTS
1502 14th St NW
Auburn, WA 98001 USA
"PREVENT HOUSE FIRES"
Install and use only in accordance with manufac-
turer's installation and operating instructions and
your local building codes.
CAUTION: Special methods are required when
passing chimney through a wall or ceiling, refer
to local building codes. Do not connect this unit
WARNING: (MOBILE HOME USA Only) An outside
air inlet must be provided for combustion, and be
unrestricted while unit is in use. Do not install appli-
ance in a sleeping room. The structural integrity of
be maintained. Approval void when label is missing.
Replace glass only with 5mm ceramic.
PIPE
INSTALLATION
A
C
E†
G
M
N
P
Single Wall
Residential or
Alcove
USA-16”
CAN-483mm
USA-21”
CAN-610mm
8”
200mm
USA-18”
CAN-533mm
84”
2134mm
30"
762mm
36"
914mm
Single w/
Pipe Shield
Residential or
Alcove
USA-10”
CAN-330mm
USA-18”
CAN-533mm
8”
200mm
USA-13.5”
CAN-419mm
84”
2134mm
30"
762mm
36"
914mm
Double Wall
Residential or
Alcove or Mobile
Home*
USA-10”
CAN-330mm
USA-18”
CAN-533mm
8”
200mm
USA-13.5”
CAN-419mm
72”
1829mm
30"
762mm
36"
914mm
CONTACT YOUR LOCAL BUILDING OR FIRE OFFICIALS ABOUT
RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA.
LISTED ROOM HEATERS, SOLID FUEL TYPE ALSO FOR USE IN
MOBILE HOME INSTALLATION (USA ONLY) PURSUANT TO (UM) 84-HUD
Date of Manufacture / Date De Fabrication
2019 2020 2021 JAN. FEB. MAR. APR MAY JUN JUL AUG SEP OCT NOV DEC
JANV FEVR MARS AVR MAI JUIN JUIL AOÛT SEPT OCT NOV DEC
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with 2020 cordwood standard
Minimum Clearance to Combustible Materials - Inches (millimeters)
SUITABLE FOR MOBILE HOME INSTALLATION
Part No. 900902-05 Rev. 0, 04/2019
DO NOT REMOVE THIS LABEL Made in U.S.A.
HOT WHILE IN OPERATION. DO NOT TOUCH,
KEEP CHILDREN, CLOTHING AND FURNITURE
AWAY. CONTACT MAY CAUSE SKIN BURNS. SEE NAME-PLATE AND
INSTRUCTIONS. DO NOT OVERFIRE - IF HEATER OR CHIMNEY CON-
NECTOR GLOWS, YOU ARE OVERFIRING. INSPECT AND CLEAN
CHIMNEY FREQUENTLY - UNDER CERTAIN CONDITIONS OF USE,
CREOSOTE BUILDUP MAY OCCUR RAPIDLY. DO NOT USE GRATE
OR ELEVATE FIRE - BUILD WOOD FIRE DIRECTLY ON HEARTH. FEED DOOR MUST BE
CLOSED DURING FIRING EXCEPT WHEN ADDING FUEL. KEEP ASH DOOR CLOSED TO
AVOID EXCESS HEAT. DANGER: RISK OF ELECTRICAL SHOCK. DISCONNECT POWER
BEFORE SERVICING UNIT. FOR USE WITH SOLID WOOD FUEL ONLY.
CAUTION:
C
US
This wood heater needs periodic inspection and repair for proper operation.
Consult the owner's manual
for further information. It is against federal regulations to operate this wood heater in a manner inconsistent
with the operating instructions in the owner's manual.
Certification test emission value 2.1 grams/hr per 2020 cordwood standard.
