background image

IMPORTANT! GENERAL SAFETY 

PRECAUTIONS. READ AND 

UNDERSTAND THESE SAFETY 

RULES BEFORE YOUR FIRST FIRE.

       WARNING 

To avoid the risk of damaging 

fireplace materials and increas-

ing the risk of fire, do not use the 

fireplace to cook or warm food.

       IMPORTANT 

When burning wood, use SOLID 

NATURAL  DRY WELL-SEASONED 

WOOD ONLY.  Hardwoods are rec-

ommended (soft woods tend to burn 

very quickly).  

• DO NOT burn treated wood, 

charcoal, coal, trash, cardboard, 

driftwood, woods dipped in tar, 

Christmas tree greens, pitch, pine 

tar, creosote, chemical chimney 

cleaners, flame colorants, poly-

styrene packaging, wood prod-

ucts with synthetic binders (i.e. 

plywood).  Plywood, lumber and 

other misc. materials can produce 

abnormally high temperatures, 

sputtering and smoking fires and 

may contain hazardous chemicals 

to treat insects and fungus.

•  Burning unapproved fuels can 

produce excessive temperatures, 

beyond the design capabilities 

of the fireplace and may produce 

excess sparks or may contain 

hazardous chemicals.  Burning 

unapproved fuels can result in 

a chimney fire, a house fire, 

personal injury, death or loss of 

property.

 

       WARNING 

Never leave children unattended 

when there is a fire burning in the 

fireplace.

       WARNING 

NEVER use gasoline, gasoline-

type lantern fuel, kerosene, 

charcoal lighter fluid, naphtha, 

engine oil or similar liquids to 

start or “freshen up” a fire in this 

fireplace. Keep any flammable 

liquids a safe distance from the 

fireplace at all times. 

       WARNING 

Use care when selecting window 

treatments for windows located 

near the fireplace.  Avoid using 

combustible flowing window 

treatments such as curtains on 

nearby windows that are of suf-

ficient length to be blown in front 

of an open flame when the window 

is opened.  Keep any combustible 

furniture, materials or decorative 

pillows at least 48" (1219 mm) 

from the front fireplace opening.

       WARNING 

Never modify or alter your fireplace 

system in any way. To do so may 

create a potential fire hazard and 

void the limited warranty

, listings 

and approvals of this system.

       WARNING 

Never leave your fireplace unat-

tended while it is burning.

       WARNING 

Always ensure that the air inlet to 

the fireplace is free from debris 

and any other obstructions that 

can block the entrance of air.

       WARNING 

Neither the manufacturer nor the 

seller warrants “smoke free” 

operation nor are we respon-

sible for inadequate system draft 

caused by mechanical systems, 

general construction conditions, 

inadequate chimney heights, 

adverse wind conditions and/or 

unusual environmental factors 

or conditions beyond our control. 

       IMPORTANT 

WHEN INSTALLED IN A MOBILE OR 

MANUFACTURED HOME:

• Mobile or manufactured home 

installations must be installed in 

accordance with the requirements 

of the Department of Housing and 

Urban Development (HUD) “Mobile 

Home Construction and Safety stan-

dards” for US or Canada Mortgage 

and Housing Corporation (CMHC) 

for Canada.

• The fireplace must be fastened to 

the floor by unfolding and screwing 

the small tabs on both sides at the 

bottom of the fireplace.   

• It is necessary to have access 

openings, for inspection purpose 

only, into built-in enclosures sur-

rounding the fireplace installation.  

Such openings to require a house-

hold tool for access.

• The vapor barrier of the mobile 

home shall be as close as possible 

of the location where the chimney 

assembly penetrates the ceiling 

and roof structure with no interfer-

ence to the required clearance to 

combustible material. 

• When the mobile or manufactured 

home has a flat roof, the Attic Radia-

tion Shield  must be installed from 

below going through the roof (See 

Figures 22b and 22d).

•  Warning: Do not install in a 

sleeping room.

•  Caution: The structural integrity 

of the manufactured home floor, 

wall, and ceiling/roof must be 

maintained.

       WARNING

The fireplace must be installed 

with an outside air kit intake, 

which is included with the fire-

place

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

3

  WARNING

THE FIREPLACE MUST BE OPER-

ATED WITH THE DOORS FULLY 

OPENED OR DOORS FULLY CLOSED. 

IF THE DOORS ARE LEFT PARTLY 

OPENED, GAS AND FLAME MAY BE 

DRAWN OUT OF THE FIREPLACE 

OPENING, CREATING RISKS OF 

BOTH FIRE AND SMOKE.  IF THE 

UNIT IS OPERATED WITH THE 

DOORS FULLY OPENED, THE FIRE 

SCREEN MUST BE USED. 

    WARNING

THIS FIREPLACE HAS NOT BEEN 

TESTED WITH AN UNVENTED 

GAS   OR A FIREPLACE INSERT.  

TO REDUCE RIS K OF FIRE OR 

INJURY, DO NOT INSTALL AN 

UNVENTED GAS LOG SET OR 

FIREPLACE INSERT OR OTHER 

PRODUCTS NOT SPECIFIED FOR 

USE WITH THIS FIREPLACE.

Содержание WCT6820WS





























Отзывы: