SuperiorFireplaces.us.com
900807-00_A
14
INSTALLATION
Continued
LOG PLACEMENT FOR MODEL BRT 4042TEN-B, 4342TEN-B,
4542TEN-B, 4042TEP, 4342TEP, 4542TEP
1. Place large back log (log 1) onto grate making sure notches
rest over grate
(see Figure 27)
.
2. Insert lower end of log 2A between first two grate fingers and posi-
tion upper end into notch on front of log 1. See
Figure 27
. Place
log 2B on front right side of grate as shown in
Figure 27
.
3. Place log 3 into notch on top left of log 1, resting lower end on
left two grate fingers
(see Figure 28).
4. Place upper end of log 4 into notch on log 1 as shown in
Figure
28
. Rest lower end of log 4 on the middle grate finger as shown
in
Figure 29
.
5. Place upper end of log 5 into notch on top inner right of log 1
(see Figure 29)
. Rest lower end of log 5 on middle grate finger
as shown in
Figure 30
.
6. Place log 6 into notch on top right of log 1
(see Figure 29)
. Rest
lower end of log 6 on top of log 2B
(see Figure 30)
.
As an option to enhance the look of the hearth, you may place volcanic
stone provided around front and sides of burner pan.
NOTE: It is important to ensure proper log placement per the manual
when installing these units. Verify pilot flame is not obstructed. See
Inspecting Pilot and Burner Flame Patterns on Page 18.
Figure 27 - Installing Logs 1, 2A and 2B
NOTICE: Do not put volcanic stone inside the burner
pan or around the air mixer fitting. Placing volcanic
stone inside the burner pan or blocking the openings
of the propane/LP air mixer could cause performance
problems.
Log 2A
Log 2B
Log 1
Notch
1
J7242
Log, Rear 27"
2A
J4245
Log, Top 11"
2B
J4262
Log, Fire Pit Rnd "Y" 15-3/4"
3
J4244
Log, Y Top Split 13-1/2"
4
J4261
Log, Firepit Split 15-3/4"
5
J4243
Log, Top Split 16"
6
J4242
Log, Top Round 11-3/4"
Figure 28 - Installing Logs 3 and 4
Figure 29 - Installing Logs 5 and 6
Figure 30 - Logs Installed for 42" Models
1
3
4
5
6
2
A
2
B
1
2
B
3
4
Log 6
Log 5
Notch
Log 4
Log 3
Notches
1
2
B
2
A
2
A
