2-8 AC Motoring Chassis Dynamometer
1. Attach the AC Motor cube to the side of the main CycleDyn chassis ensuring the cube is level.
2. Insert the shaft keys and slide the couplers on the shafts.
3. Place the keys and couplers on the in-line torque/speed transducer
4. Mount the transducer assembly on the bracket in the AC Motor cube. Be certain to mount the
nylon cushions on both sides of the bracket.
5. Bolt the couplers together.
6. Verify the coupler and transducer run-out is less than 0.020". Adjust if necessary.
