Superabrasive
User Manual
Original Language
Lavina® 30LEU
10/2020
25
The reassembly is the same process in reverse.
It is important to match the threads of the
conical sleeve and the belt washer(Fig.8.8.11).
Put the front washer (Fig.8.8.12), on the screw ‐
using “blue” thread locking adhesive.
Tightening force of the bolts has to be
4,5...6N.m(3,3...4,4 ft/lbs). Carefully replace
the two binder screws while leaving the
central thread open.(Fig.8.8.12)(Fig.8.8.13).
Insert the screws by alternating at 1.5
revolution each until the conical sleeve pulls
up the belt pulley. The conical sleeve must
be aligned in height with the belt
washer(Fig.8.8.14).
Dismounting the planetary belt is
possible without removing of the Bottom
cover assembly by unscrewing the eight
bolts and removing the service window
cover and the sealing
(Fig.8.8.15)(Fig.8.8.16)
to access the planetary belt (see
8.8.17)
Figure 8.8.9
Figure 8.8.10
Figure 8.8.6
Figure 8.8.7
Figure 8.8.8
Figure 8.8.17
Figure 8.8.16
Figure 8.8.15
Figure 8.8.11
Figure 8.8.12
Figure 8.8.14
Figure 8.8.13
