Superabrasive
User Manual
Original Language
Lavina® 30LEU
10/2020
9
3.2 TURNING THE MACHINE FROM WORKING TO TOOL MOUNTING POSITION
Put the handles of the carriage as shown on (Fig. 3.5).
Ensure that the water tank is empty before flipping the
machine. Push the handles and flip in position shown on
(Fig. 3.6). If necessary, help by placing your foot on the
heel near the control box.
Always keep both rear
wheels locked (Fig. 3.7).
Unlock the wheels (Fig. 3.8)
only when you wish to move the machine.
3.3 LIFTING
Lifting the machine by crane is possible by using the handles of the carriage (see fig. 3.5 and fig. 3.6).Do not lift any other
loads on the machine. Always use hoisting equipment rated for 350 kg (772 lbs) or greater.
3.4 STORAGE
Always store the LAVINA® ELITE machine in a dry place. Never
transport the LAVINA® ELITE machine unprotected; it may be
damaged if transported unprotected and exposed to rain or snow.
When the machine is in storage and the temperature may fall
down to or below 32F (or 0
o
C). You should empty the water from
the system:
-
Pull out the hose of the tank (Fig.3.7)
-
With compressed air blow out the water from the system
in the two positions of the turn-cock.
4. OPERATION
4.1 PRELIMINARY CONTROLS
Inspect the working area as explained in the safety instructions. Fill in the water tank for wet use or connect the vacuum extractor
and ensure that the vacuum hose is clear and it will follow the machine easily.
Make sure that the electrical motor is connected with the power box and then you can connect the power cable with the
electricity and start the machine.
Figure 3.7
Figure 3.5
Figure 3.6
Figure 3.7
Figure 3.8