Superabrasive
Owner’s Manual –
Lavina 7 Pro
1/2012
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina 7 Pro machine, the servicing technician as well as for
anyone involved with operating or servicing the machine. We recommend that you read the instructions very carefully
and follow them strictly. The manual includes information about assembling, using, handling, adjusting and maintaining
your Lavina 7 Pro floor grinding and polishing machine.
MANUFACTURER
Superabrasive was founded 24 years ago, in 1987, as a manufacturer of high quality diamond tools for the stone and
concrete industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and
floor grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable
them to work more efficiently.
GENERAL DESCRIPTION
The Lavina 7 Pro machine is intended for grinding, polishing and buffing concrete, marble, granite, limestone and
terrazzo surfaces with diamond tools.
The Lavina 7 Pro is a one-disc machine..
The Lavina 7 Pro is intended to grind/polish edges, corners, steps of stairs or difficult to reach surfaces. Additionally, the
machine could be used for grinding wood floor surfaces.
For best results, use only tools manufactured or recommended by Superabrasive and its distributors.
WARNING!
The Lavina 7 Pro machine is manufactured and fitted for the above-mentioned applications only! Every other use may
possess risks to the persons involved.
MACHINE CHARACTERISTICS
The Lavina 7 Pro is made so it can grind/polish surfaces, where bigger machines have difficulties to reach.
LAVINA 7 PRO MAIN DESIGN
•
The carriage
is swiveling 30º to both sides The
machine can be pushed straight and the
grinding can follow a wall. The normal wheel
support can be changed with a “stair” wheel
support, which can be adjusted in height to work
on stairs.
•
The halogen spotlight
(Fig.1.2) enables the
operator to work in darker areas.
Existing lighting system does
not replace adequate overhead lighting.
•
The frame
The handle on the frame is
adjustable in height and allows the operator to
work in a correct and safe posture.
•
The controls
are positioned on top of the electrical box (fig.1.3)
•
The electrical box
(fig.1.3) contains the electric switching devices and the
inverter. The motor feeding cable and the main feeding are located
on the bottom of the box.
•
The motor
is mounted on the base plate and is driving the grinding head with a belt
system.
ENVIRONMENTAL CONDITIONS
The temperature range for operating the Lavina 7 Pro outdoors is between 41°F and 86°F or 5°C and 30°C. Never use
the Lavina 7 Pro during rain or snow when working outdoors. When working indoors, always operate the machine in
well-ventilated areas.
ELECTRICAL CONNECTION
The voltage (Volt) and power (Ampere) are displayed on a label on the electrical control box to avoid any incorrect
connection. Refer to these before connecting the power. To avoid electrical shocks, make sure the ground power
supply is functioning properly.
Figure 1.3
Figure 1.2
Figure 1.1
Figure 1.3