Superabrasive
Owner’s Manual –
Lavina 7
Pro
1/2012
14
Slide in the new belt through the top cover (Fig. 5.1 47) opening (Fig. 7.16). Put the belt in place by turning the pulleys
(Fig. 7.17, Fig. 7.18). Tension like in the chapter “Tensioning the Belts”
8. WARRANTY AND RETURNS
Warranty Policy for Lavina 7 Pro
If your warranty card is missing, call your local distributor and request a warranty card or visit us at
www.superabrasive.com to download one.
The customer is responsible for filling out the card and mailing it to the manufacturer’s address indicated on the card.
To ensure registration and activation of the warranty coverage, the warranty card must be mailed to the manufacturer
within 30 days from date of purchase. Failure to mail the warranty card within 30 days from date of purchase may void
the warranty. Make sure you provide the manufacturer with all the information requested, and most importantly with the
distributor’s name, machine serial number and purchase date
Superabrasive Inc. guarantees that the original purchaser of the Lavina 7 Pro machine will be covered against defects
in material and workmanship for a period of 2 years from the date of delivery or 500 hours of use whichever comes first.
The following conditions pertain to this warranty:
•
Applies only to the original owner and it is not transferable.
•
Machine must not be dismantled and tampered with in any way.
•
Covered components proven defective will be repaired or replaced at no charge. Covered components
include motors, bearings and switches.
•
This warranty does not apply to any repair arising from misuse, neglect or abuse, or to repair of proprietary
parts.
•
This warranty does not apply to products with aftermarket alterations, changes, or modifications.
•
This warranty is in lieu of and excludes every condition of warranty not herein expressly set out and all
liability for any form of consequential loss or damage is hereby expressly excluded.
•
This warranty is limited to repair or replacement of covered components and reasonable labor expenses.
•
All warranty returns must be shipped freight prepaid.
The above warranty conditions may be changed only by Superabrasive. Superabrasive reserves the right to inspect and
make a final decision on any machine returned under this warranty. This warranty applies to new, used and demo
machines.
Superabrasive does not authorize any person or representative to make any other warranty or to assume for us any
liability in connection with the sale and operation of our products.
RETURN POLICY FOR LAVINA 7 PRO
Lavina 7 Pro machines may be returned, subject to the following terms:
In no case, a machine is to be returned to Superabrasive Inc. for credit or repair without prior authorization. Please
contact Superabrasive Inc. or your local distributor for an authorization and issuance of a return authorization number.
This number along with the serial number of the machine must be included on all packages and correspondence.
Machines returned without prior authorization will remain property of the sender and Superabrasive Inc. will not be
responsible for these.
No machines will be credited after 90 days from the date of invoice.
All returns must be shipped freight prepaid. All returns may be exchanged for other equipment or parts of equal dollar
value. If machines are not exchanged, they are subject to a fifteen percent (15%) restocking fee.
9. DISPOSAL
If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive or a local
distributor, where a professional disposal complying with the environment laws and directives is guaranteed.
Figure 7.16
Figure 7.17
Figure 7.18
