25
Be in charge.
Super B.
Endurance lifecycle
3 hours
C3 (30A)
Table 21. Charging rates at different charge currents
5.2.2. Battery balancing
The BMS automatically balances the cells if necessary. The Li-ion battery can be used
normally during balancing. Balancing ensures all cells are at the same voltage level and
enhances usable battery capacity.
5.3. Li-ion battery self consumption
When CANopen communication is switched on, the Li-ion battery consumes more energy.
(see paragraph 3.5.7 Configuration Switch)
Communication setting
Li-ion battery self consumption
CAN communication enabled
0.7 Ah per day
CAN communication disabled
0.4 Ah per day
Table 22. Li-ion battery self consumption
5.4. Battery History Recording
The complete Li-ion battery history is stored inside the Li-ion battery and can be accessed by
your reseller or by Super B.
6. Inspection and cleaning
6.1. General information
!
Warning!
Never attempt to open or dismantle the Li-ion battery! The inside of the Li-ion
battery does not contain serviceable parts.
1. Disconnect the Li-ion battery from all loads and charging devices before performing cleaning
and maintenance activities (see paragraph 4.8).
2. Place the enclosed protective caps over the terminals before cleaning and maintenance
activities to avoid the risk of contacting the terminals.
6.2. Inspection
1. Inspect for loose and/or damaged wiring and contacts, cracks, deformations, leakage or
damage of any other kind. If damage to the Li-ion battery is found, it must be replaced. Do not
attempt to charge or use a damaged Li-ion battery. Do not touch the liquid from a ruptured
Li-ion battery.
2. Routinely check the Li-ion battery’s SoC. Lithium Iron Phosphate batteries continue to slowly
self-discharge (<3% per month) when not in use or stored (see paragraph 5.3).
3. Consider replacing the Li-ion battery with a new one if you note either of the following
