19
Be in charge.
Super B.
4.4.2. Connecting shrink fit type of power cables
1. Remove the automotive power terminals
.
(Figure 6)
2. Connect the load or charger to the X2 (+) terminal of the Li-ion battery. (Figure 7)
Use the included M8 bolt, spring washer and plain washer to connect the Li-ion battery
cable.
!
Warning!
Do not connect the X1 (-) terminal first as this may lead to short circuits.
3. Connect the X1 (-) terminal of the Li-ion battery. (Figure 7)
Use the included M8 bolt, spring washer and plain washer to connect the Li-ion battery
cable.
4. Ensure both contacts are tightened to 20Nm.
5. Place the handle covers over the terminals. (Figure 8)
2
3 5
2x
2x
Figure 6. Remove the automotive power terminals.
