7
Be in charge.
Super B.
Always connect batteries of the same type / capacity and age in a parallel setup and do not
add more batteries to the parallel bank after a certain time. This could lead to a degradation
of the total capacity and disturbed current distribution within the system.
2.3. Glossary of Terminology
BMS:
Battery Management System
Charge cycle:
A period of use from fully charged, to fully discharged, and fully
recharged again
Endurance Life-cycle:
The products maximum lifespan, achieved by following the guidelines
presented in this manual
LiFeP04
Lithium Iron Phosphate
SoC
State of Charge
SoH
State of Health
CCCV
Constant Current - Constant Voltage
DoD
Depth of Discharge
I/O
Inputs and Outputs
Table 1. Glossary of terminology
2.4. Used symbols
The following icons will be used throughout the manual:
!
Warning!
A warning indicates severe damage to the user and/or product may occur when a
procedure is not carried out as described.
!
Caution!
A caution sign indicates problems may occur if a procedure is not carried out as
described. It may also serve as a reminder to the user.
3. Product specifications
3.1. Product features
•
A-grade prismatic cells for highest possible energy density and quality
•
Lithium Iron Phosphate (LiFePO4): Safe lithium technology
•
Integrated short circuit protection
•
Integrated protection device for maximum protection and safety
•
Integrated BMS (Battery Management System)
•
Integrated cell heating to allow safe charging below 0°C (with autonomous operation if
needed)
•
Adaptive cell balancing
•
Robust casing made from environmentally friendly materials (fully recyclable)
•
Overheating protection on battery terminals in case of badly connected cables
