SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S
UP’AIR
_
S
KYPPER
FR
Page 19
Modify the angle by pulling on the cord ( to become closer to the
vertical axis ), or the black strap ( to pull away from the vertical
axis ).
The lumbar support can be tightened/increased or loosened
with the strap or the loop-cord.
Tighten the shoulder straps by pulling the the loop-cord forward.
Loosen by pulling the tubular strap rearward.
Resting against the shoulder straps enhances comfort ; the ad-
justment must be precisely done.
B Adjusting the backrest angle.
C Adjusting the shoulder straps.
Using the two lateral buckles and the two buckles underneath
the seat, modify the Speedbag angle around the horizontal axis.
A Adjusting the Speedbag angle and length.
Tighten
Tighten
Loosen
Loosen
B
C
