SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S
UP’AIR
_
S
KYPPER
FR
Page 11
BUMPAIR assembly
1
2
3
4
Open the zipped pocket.
Open the internal zip ( green ) of the
« U » shaped pocket.
Push the Bumpair forward while chec-
king the following points :
The upper Bumpair section must be
inserted inside the « hood » beneath
the backrest straps.
The Bumpair must be pushed all the
way in, sandwiched beneath the sea-
ting area and the supporting wall stit-
ched along the green seam marker.
The Bumpair will set itself in this com-
partment, resting against the reserve
parachute pockets.
The Bumpair is installed in place permanently. There is no need to re-
move it from its location except in case of severe impact, when it would
be necessary to inspect it for possible damage.
1
2
3
4
