Harness User’s manual
S
UP’AIR
_
DELIGHT
2
Page 23
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
1.
Set-up the harness during a hang-test.
3.
Adjust the backrest using the two lateral buckles relative to your piloting posture.
4.
Adjust the shoulder straps using the shoulders adjustment buckles.
2.
Adjust the Speedbag length with its upper and lower adjustment buckles.
6.
Once well seated inside the harness, there is only the backrest to adjust.
>> Tilting the Speedbag angle. :
Shorten the Speedbag upper adjustment straps. Lengthen the Slider panel if
needed.
>> Tilt the lower Speedbag section. :
Shorten the Slider panel. Lengthen the upper Speedbag straps.
tighten
tighten
loosen
loosen
Tension on the shoulder straps helps with comfort, and must be precisely adjusted.
5.
The internal lateral adjustment enables the lower backrest section to be fine
tuned and reduce the empty space commonly found on the lower part of the
spine while seating.
Harness adjustments.
Adjusting the harness. :
