Harness User’s manual
S
UP’AIR
_
DELIGHT
2
Page 11
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
accessories assembly
8
Inner zoomed view
1.
Open the pocket’s zipper located
beneath the seat.
2.
Seperate the two flaps of the sup-
porting walls ( velcro ).
3
. Insert the BUMPAIR with the thin
section first.
4.
Position it between the reserve
parachute pocket wall and harness’s
backrest.
5.
The lower BUMPAIR section must
rest against the supporting wall.
6.
Close the supporting wall’s two
flaps by using the velcro strips.
7.
Close the pocket beneath the seat.
8.
Secure the BUMPAIR against the
wall by applying pressure from the
inside of the reserve parachute poc-
ket.
BUMPAIR 15 BACK D2 installation. :
Reference : SFBU011
>> 4. BUMPAIR
