Harness User’s manual
S
UP’AIR
_
DELIGHT
2
Page 17
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
Connect the reserve parachute to the risers :
Installing the reserve parachute
1.
- Open the square Maillon
- Connect it to the single reserve
parachute bridle loop
- Push the maillon through the
plastic ring
- twist
2.
- Push the risers through the
plastic ring loop
- Push the maillon through the
risers buckles
3.
- Give a second twist to the
plastic ring
- Push the buckle through the
maillon.
4.
-
PTidy up the assembly
- Be certain that the riser end
loops are securely in place
- Close the maillon tightly by
hand
- Tighten securely using pliers
and making a
¼
tightening turn
