Harness User’s manual
S
UP’AIR
_
DELIGHT
2
Page 16
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
2.
- Make a loop to loop ( lark ) con-
nection between the risers and the
reserve parachute bridle attach-
ment points.
3.
- Pull the loop to loop connection
tight.
1.
-
Open the riser guide by pulling the zipper from point « A »
to point « B », and then leaving the zipper tab at the « B » level.
A
Connecting the reserve parachute risers to the harness :
Installing the reserve parachute
B
4.
- Repeat the operation with the
other riser.
5.
- Bring the zipper tab back from « B » to « A ».
B
Toward point «A»
This step is over, the riser guide will be closed af-
ter the connection risers/parachute is completed
(page 17).
