Sunx SF4B 01 Series, Инструкция по эксплуатации

Страница: 10 / 102

SUNX Limited MJE-SF4B01 No.0005-03V
- 10 -
<When using this device in combination with the control unit SF-C11>
Model Examination No.: No.TA348
Conforming Standards: Standards for press machine or shear safety equipment structure
(Ministry of Health, Labor and Welfare Notice No.102, issued September 21, 1978)
* No.TA348 is a Model Examination No. for the combination of the SF-C11 and this device.
Up to three sets (maximum number of the beam channel: 192 beam channels) can be
connected in series connection.
* The Model Examination No.TA348 is indicated on SF-C11 .
(The Model Examination No.TA347 is indicated on this device.)
<When using this device in combination with the control unit SF-C13>
Model Examination No.: No.TA349
Conforming Standards: Standards for press machine or shear safety equipment structure
(Ministry of Health, Labor and Welfare Notice No.102, issued September 21, 1978)
* No.TA349 is a Model Examination No. for the combination of the SF-C13 and this device.
Up to three sets (maximum number of the beam channel: 192 beam channels) can be
connected in series connection.
* The Model Examination No.TA349 is indicated on SF-C13 .
(The Model Examination No.TA347 is indicated on this device.)
<When using this device in combination with the application expansion unit
SF-C14EX-01>
Model Examination No.: No.TA350
Conforming Standards: Standards for press machine or shear safety equipment structure
(Ministry of Health, Labor and Welfare Notice No.102, issued September 21, 1978)
* No.TA350 is a Model Examination No. for the combination of the SF-C14EX-01 and this
device.
Up to three sets (maximum number of the beam channel: 192 beam channels) can be
connected in series connection.
* The Model Examination No.TA350 is indicated on SF-C14EX-01 .
(The Model Examination No.TA347 is indicated on this device.)
1-4
Confirmation of Packed Contents
Sensor: Emitter, Receiver each 1pc.
Test Rod 1 pc.
For SF4B-F -01 : SF4B-TR14 (ø 14 x 220mm), For SF4B-H -01 : SF4B-TR25 ( Ǿ 25 x 220mm)
Intermediate Supporting Bracket ( MS-SFB-2 ) 0 to 3 sets
Note: The intermediate support bracket ( MS-SFB-2 ) is enclosed with the following products. The quantity dif-
fers depending on the product as shown below:
1 set :
SF4B-F -01 … Sensor with 79 to 111 beam channels
SF4B-H -01 … Sensor with 40 to 56 beam channels
SF4B-A -01 … Sensor with 20 to 28 beam channels
2 sets : SF4B-F127-01 , SF4B-H -01 … Sensor with 64 to 80 beam channels
SF4B-A -01 … Sensor with 32 to 40 beam channels
3 sets : SF4B-H -01 … Sensor with 88 to 96 beam channels
SF4B-A -01 … Sensor with 44 to 48 beam channels
Instruction Manual (this manual) 1 pc.