Chapter 3 How to Set Your SRC-7000
21
4.
Please choose two points from the blocks on LCD. A “
v
” symbol
will appear where you tapped. After you determine the second
point, the key frame will show up on the screen automatically. Tap
the frame to confirm the location.
If you want to relocate the points, you can press the
button
to quit.
a.
The size of the key will depend on the points you choose.
b.
You cannot setup a device that will overlap the adjacent
keys.
5.
After deciding the location, please name the device by taping the
keypad on the screen.
Select letters
Tapping the
key to select the
capital letters or lower case letters.
Select Icons
Tapping the
key to select more
symbols.
Delete letters/icon
Tapping the
key if you want to delete
the letters or symbols.
Next row:
Tapping the
key to enter the next row.
And then press the
button to confirm your decision.
6.
Please decide the “Device Category” for your device by press the
or
buttons. Press the
to confirm and enter next
step.
7.
Finally, please decide how you will load the IR remote codes for
the device. There are three choices for you: “Pre-code”,
